Skip to main content

D325f-SDR 2.0 adds recording tools to a modified LG D325 radio receiver

The open-source project reuses a phone’s cellular modem for radio reception. Version 2.0 improves recording workflows, while its hardware and software requirements remain narrow.

An unbranded phone with a blank screen beside a black whip antenna and coiled cable on a pale workbench.
AI-generated editorial illustration by TechKili using Cloudflare Workers AI (FLUX.2 klein).
Share this article:
In this article

D325f-SDR 2.0 adds recording and playback tools to an experimental radio receiver built around an LG D325's own cellular modem. It avoids a separate SDR receiver, but still needs modified hardware and system software. It is a project for a suitably prepared spare handset, not an ordinary app for an arbitrary Android phone.

Logan Zarov published version 2.0 on November 9, 2026, the day of the originating Hackaday coverage. The setup documentation's October 24 confirmation relates to the earlier 1.0.0 setup, rather than the release date of this update.

The modem replaces the receiver, not the antenna work

The project README describes access to the modem's IQ samples—the digital signal data that software processes into spectrum displays and audio. Its documented setup uses LineageOS 14.1, root access, a modified kernel and a modem patch.

The hardware documentation also describes board wiring and an external antenna connected through a homemade adapter to a repurposed headset socket. A standard audio adapter is therefore not established as a substitute. Reusing a radio already inside the phone is the interesting engineering result; it does not remove the assembly work.

A continuous file can still contain gaps in reception

The 2.0 release notes describe recording while the spectrum and audio remain active, plus scheduled captures with the screen off. If reception fails after recording starts, the software fills the interruption with zero samples.

That preserves the file's time span, but those samples are not evidence of silence on the air. Anyone analysing a recording needs to distinguish missing reception from a measured signal. The developer also excludes networking and streaming features, citing unreliable Wi-Fi while Bluetooth serves as a continuous local-oscillator carrier.

Check the exact spare-device setup

The device guide distinguishes a working microSD-based setup from an internal-eMMC boot image not yet tested on a phone. It also flags a userdebug build that accepts USB ADB connections without an on-screen authorization prompt.

For an experimenter, the first decision is whether their handset and recovery experience match those documented constraints. The developer's demonstrations and software checks do not establish general compatibility or calibrated receiver performance, and TechKili has not reproduced them. Buying an old phone solely on the strength of the headline would get ahead of that evidence.

Sources